AstroStart Security System VSS-113 Guía de instalación descargar pdf (Pagina 4)

Primary Harness (H1) Wire Connection Guide

This guide describes in detail the connection of each wire. Also included are possible applications of each wire. This

system was designed with the ultimate in flexibility and security in mind. Many of the wires have more than one possible

function. Please read carefully to ensure a thorough understanding of this unit.

H1/1 ----- PINK (-) 200mA CHANNEL 2 VALIDITY OUTPUT

H1/2 ----- RED (+) CONSTANT POWER INPUT

H1/3 ----- RED/WHITE (+) SIREN OUTPUT

H1/4 ----- ORANGE (+) SWITCHED IGNITION INPUT, ZONE 5

H1/5 ----- BLACK (-) CHASSIS GROUND INPUT

H1/6 ----- PURPLE (+) DOOR TRIGGER INPUT, ZONE 3

H1/7 ----- BLACK/WHITE (-) INSTANT TRIGGER INPUT, ZONE 1

H1/8 ----- WHITE (-) DOOR TRIGGER INPUT, ZONE 3

H1/9 ----- GREY (-) 200mA DOME-LIGHT SUPERVISION OUTPUT

H1/10 ----- PINK/WHITE (-) 200mA CHANNEL 3 PROGRAMMABLE OUTPUT

H1/11 ----- GREEN (+ / -) SELECTABLE LIGHT FLASH OUTPUT

H1/12 ----- ORANGE/BLACK (-) 500mA GROUND-WHEN-ARMED OUTPUT

H1/1 PINK (-) 200 mA Channel 2 Output

H1/1 PINK

(+) 12V IF (+) SWITCHED

When the system receives the code controlling

channel 2 for longer than 1.5 seconds, the PINK

wire will supply an output as long as the

transmission continues.

This is often used to operate a trunk/hatch release

or other relay/driven function.

(-) GROUND IF (-) SWITCHED

NEVER USE this wire to drive anything but a relay or a low-current input!

The transistorized output can only supply 200 mA of current. Connecting

directly to a solenoid, motor, or other high-current device will cause it to fail.

H1/2 RED (+) Constant Power Input

Connect to the battery positive terminal or the constant 12V supply to the ignition switch.



Always use a fuse within 12 inches of the point you obtain

(+)12V. Do not use the 15 amp fuse in the harness for this

purpose. This fuse protects the module itself.

H1/3 RED/WHITE (+) Siren Output

Connect this to the RED wire of the siren. Connect the BLACK wire of the siren

to (-) chassis ground, preferably at the same point you connect the control

module’s BLACK ground wire.

H1/3 RED/WHITE

(+) SIREN OUTPUT

RED

BLACK

SWITCHED TRUNK

RELEASE WIRE

+12V CONSTANT FUSED

1 2 3 4 5 6 7 8 9 ... 17 18

Comentarios a estos manuales

Sin comentarios

AstroStart Security System VSS-113 Guía de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Alarma de carro AstroStart Security System VSS-113