AstroStart Security System VSS-113 Guía de instalación descargar pdf (Pagina 10)

4. Select a Feature. Press and release the Valet/Program switch the number of times

corresponding to the feature you wish to change. For example, to access the third

feature, press and release the switch three times. Then press the switch once more and

HOLD it. The siren will chirp the number of times equal to the step you have accessed.

5. Program the Feature. While HOLDING the Valet/Program switch, you can toggle the

feature on and off using the remote transmitter. Pressing

will select the one chirp

setting. Pressing

will select the two chirp setting. (See System Features

Menus section of this guide.)



The Valet pulse count feature (2-5) and the Channel three timed output (2-9) have five

possible settings each. Pressing

will toggle through all the two-chirp settings

6. Release the Valet/Program Switch.

Once a feature is programmed:

 Other features can be programmed within the same menu.

 Another menu can be selected.

 The learn routine can be exited if programming is complete.

To access another feature in the same menu:

1. Press and release the Valet/Program switch the number of times necessary to advance from the feature you

just programmed to the next one you want to program.

2. Then press the Valet/Program switch once more and HOLD it.

For example, if you just programmed the third feature in the menu and you would like to program the seventh feature in

the menu, you would press and release the Valet/Program switch four times and then press it once more and HOLD it.

The siren would chirp seven times to confirm access to the seventh feature.

To select another menu:

1. Press and HOLD the Valet/Program switch.

2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which menu has

been accessed.

For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to program a feature in

Menu #2, you press and HOLD the Valet/Program button. After three seconds, the siren chirps twice indicating access

to Menu #2.

To exit the learn routine do one of the following:

 Close the open door.

 Turn the ignition on.

 No activity for longer than 15 seconds.

 Press the Valet/Program switch too many times.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

AstroStart Security System VSS-113 Guía de instalación Pagina 10