AstroStart Security System VSS-113 Guía de instalación descargar pdf (Pagina 15)

To exit the learn routine:

One long chirp indicates that Learn Routine has been exited. Learn Routine will be exited if any of the following occurs:

 Ignition is turned off.

 Door is closed.

 Valet/Program button is pressed too many times.

 More than 15 seconds elapse between steps.

Transmitter Configurations

The transmitters can be programmed with the standard configurations by using the Auto Learn functions in the

Transmitter/Receiver Learn Routine.

STANDARD CONFIGURATION

Button

Pressing

duration

Operates

1 sec. The locking, arming functions and the deactivation of the Panic mode.

5 sec. The panic mode.

1 sec. The unlocking, disarming functions and the deactivation of the Panic mode.

5 sec. The panic mode.

1.5 sec. Channel 2

5 sec. The Silent Mode™.

1 sec. Channel 3.

Diagnostics

The system’s microprocessor monitors and reports all active and violated zones when arming and disarming. LED

flashes indicate the active or violated zone; siren chirps indicate system status.

ARM/DISARM DIAGNOSTICS

The number of siren chirps will indicate the status of the alarm when arming and disarming. For information on which

zone is active or has been violated refer to the Table of Zones.

System Status Chirps

Action Number of Chirps Description

Arm 1 System armed

Arm 1 (3 second delay), 1 System armed with Bypass Notification

Disarm 2 System disarmed

Disarm 4 System disarmed with Tamper Alert

Disarm 5 System disarmed NPC® active

1 2 ... 10 11 12 13 14 15 16 17 18

Sin comentarios

AstroStart Security System VSS-113 Guía de instalación Pagina 15